derek
Member of CYC 
Posts: 10
|
Post by derek on Sept 4, 2016 18:58:04 GMT
Hi anybody had success with polishing out the brown bay tinge - if so what polish did you use?
|
|
|
|
Post by sailorjoe on Sept 5, 2016 12:59:02 GMT
Hi anybody had success with polishing out the brown bay tinge - if so what polish did you use? |
|
|
|
Post by sailorjoe on Sept 5, 2016 13:00:33 GMT
Article in this Oct PBO recommends Y10 or Grunt boat cleaner, both oxalic acid based. and polishing with Far'ecta G3. and finally waxing. I havnt tried it myself. I will be trying "Astonish" mould and mildew remover, Its been very good so far, cleaning a very mucky deck and a well stained inflatable. (and its cheep at £1.00 a bottle from those cut price shops) Good luck
|
|
|
|
Post by luke on Sept 5, 2016 16:52:41 GMT
I used toilet lime scale remover, spray it on leave for 20 mins and then wash off with plenty of water and it takes the brown bay tinge off, nice and easy and costs £1
|
|
derek
Member of CYC
Posts: 10
|
Post by derek on Sept 11, 2016 19:15:15 GMT
Thanks everybody
Ended up using starbrite (oxalic based)as limited with delivery options - certainly got the tinge off but some water marks still persisting. Bit Po'ed as managed to kick the 1L bottle over half way through the job, so only applied once - hay ho.
|
|
|
|
Post by Kingfisher on Sept 13, 2016 11:08:15 GMT
For rust marks and brown stain and ground in dirt I buy stuff called magic on ebay same as Y10 gel but a lot cheeper
|
|
